# nec.py Decoder for IR remote control using synchronous code
# Supports NEC protocol.
# For a remote using NEC see https://www.adafruit.com/products/389

# Author: Peter Hinch
# Copyright Peter Hinch 2020 Released under the MIT license

from utime import ticks_us, ticks_diff
from stm32_ir_receiver import IR_RX

class NEC_ABC(IR_RX):
  def __init__(self, pin, extended, callback, *args):
    # Block lasts <= 80ms (extended mode) and has 68 edges
    super().__init__(pin, 68, 80, callback, *args)
    self._extended = extended
    self._addr = 0

  def decode(self, _):
    try:
      if self.edge > 68:
        raise RuntimeError(self.OVERRUN)
      width = ticks_diff(self._times[1], self._times[0])
      if width < 4000:  # 9ms leading mark for all valid data
        raise RuntimeError(self.BADSTART)
      width = ticks_diff(self._times[2], self._times[1])
      if width > 3000:  # 4.5ms space for normal data
        if self.edge < 68:  # Haven't received the correct number of edges
          raise RuntimeError(self.BADBLOCK)
        # Time spaces only (marks are always 562.5µs)
        # Space is 1.6875ms (1) or 562.5µs (0)
        # Skip last bit which is always 1
        val = 0
        for edge in range(3, 68 - 2, 2):
          val >>= 1
          if ticks_diff(self._times[edge + 1], self._times[edge]) > 1120:
            val |= 0x80000000
      elif width > 1700: # 2.5ms space for a repeat code. Should have exactly 4 edges.
        raise RuntimeError(self.REPEAT if self.edge == 4 else self.BADREP)  # Treat REPEAT as error.
      else:
        raise RuntimeError(self.BADSTART)
      addr = val & 0xff  # 8 bit addr
      cmd = (val >> 16) & 0xff
      if cmd != (val >> 24) ^ 0xff:
        raise RuntimeError(self.BADDATA)
      if addr != ((val >> 8) ^ 0xff) & 0xff:  # 8 bit addr doesn't match check
        if not self._extended:
          raise RuntimeError(self.BADADDR)
        addr |= val & 0xff00  # pass assumed 16 bit address to callback
      self._addr = addr
    except RuntimeError as e:
      cmd = e.args[0]
      addr = self._addr if cmd == self.REPEAT else 0  # REPEAT uses last address
    # Set up for new data burst and run user callback
    self.do_callback(cmd, addr, 0, self.REPEAT)

class NEC_8(NEC_ABC):
  def __init__(self, pin, callback, *args):
    super().__init__(pin, False, callback, *args)

class NEC_16(NEC_ABC):
  def __init__(self, pin, callback, *args):
    super().__init__(pin, True, callback, *args)